SuperDevTools

Overtime calculator

1. Your hourly rate

2. Hours worked

Entry

Accepted formats: 45, 45:30, 45h30 or 45.5. Up to 6 weeks for a monthly table.

3. Threshold and overtime rates

Presets:

Overtime rates and thresholds depend on the law, your collective agreement or your contract. This tool does the arithmetic; it does not give legal advice.

Result

Everything is calculated on your device. Nothing is sent, and nothing is kept unless you tick the box above.

What your overtime is worth

This calculator splits a week into regular hours and overtime, applies the premium for each tier, and shows the gross amount of every line, the total for the week and a monthly equivalent. Use it to check a paycheck, to see what an extra shift is really worth, or to compare being paid against taking time off.

The default follows the common US rule for non-exempt employees under the Fair Labor Standards Act: time and a half for hours over 40 in a workweek. Double time is optional. In the UK there is no legal right to extra pay for overtime, so your contract decides. Every setting can be changed.

How to use it

  1. In "1. Your hourly rate", choose "my hourly rate" and type it, or pick "my monthly salary" and fill in "Contract hours per week". Choose the "Currency".
  2. In "2. Hours worked", keep "weekly total" or switch to "day by day (h:mm)" to enter Monday to Sunday separately.
  3. Click "Add a week" (up to 6) to build a "Monthly table" for a whole pay period.
  4. In "3. Threshold and overtime rates", set the "Weekly threshold (h)", then each tier with "Up to (h)" and "Premium (%)". A 50% premium is time and a half; 100% is double time. The presets "Time and a half (×1.5)" and "×1.5 then double time" fill them in.
  5. Tick "Time off in lieu instead of pay" if your extra hours are banked as leave.

Example: 46 hours at $20 an hour

LineHoursHourly rateAmount
Regular hours40$20.00$800.00
Tier 1 (+50%), over 40 h6$30.00$180.00
Gross pay for the week46$980.00

The six overtime hours add $180. The "Monthly equivalent (× 52 ÷ 12)" is 980 × 52 ÷ 12 = $4,246.67, assuming every week looks the same.

Adding double time

Click "×1.5 then double time": tier 1 runs from 40 to 50 hours at +50%, and tier 2 pays +100% above 50 hours. For a 52-hour week at $20, that gives $800 regular, 10 × $30 = $300, and 2 × $40 = $80, so $1,180.00. Change the 50 if your contract starts double time elsewhere.

Starting from a salary

The tool turns a monthly salary into an hourly rate with the usual convention: weekly hours × 52 ÷ 12. At 40 hours that is 173.33 hours a month, so $3,500 a month gives $20.19 an hour, rounded to the cent. Salaried employees classed as exempt are usually not owed overtime at all, so check your status first.

Time off in lieu

With the box ticked, the 6 overtime hours become 6 × 1.5 = 9 hours of leave, and gross pay stays at $800.

Common mistakes

  • Typing 7.30 for seven and a half hours. The tool reads 7.3 hours, which is 7 h 18 min. Type 7:30 or 7.5.
  • Counting daily overtime: this calculator works week by week. A single 10-hour day adds no overtime if the week stays under the threshold. Some states, such as California, also have daily rules the tool does not apply.
  • Reading the total as take-home pay. It is gross, before tax and deductions.

FAQ

Is time and a half always 1.5 times my rate?

For the hours over the threshold, yes: $20 becomes $30. Under US federal law the regular rate can also include some bonuses, which this tool does not add.

Can I work out overtime for several weeks at once?

Yes. Each week is calculated on its own, because a short week does not cancel the overtime of a long one. The table shows every week and the total.

Are these rates legal advice?

No. Overtime rules depend on the law where you work, your collective agreement and your contract. The tool only does the arithmetic.

Is anything saved?

Only if you tick "Remember my settings on this device". The rate, threshold and tiers then stay in your browser. Hours are never kept, and nothing is sent anywhere.