SuperDevTools

Speech length calculator: words to minutes

Pace
Estimated length 7 min 42 s
PaceSpeedLength

How many words for my time slot?

Measure my speaking speed

Click “Start”, read the passage out loud as if you had an audience, then click “Stop”. You can replace the passage with the opening of your own text.

0:00

Space bar: start or stop the stopwatch.

Time markers

    How long will your speech take?

    Paste your speech, talk or presentation script and this speech length calculator turns words into minutes at speaking pace, including any pauses you plan. People speak far more slowly than they read silently. Common rules of thumb for a text delivered to an audience are about 110 words per minute for a slow pace, 130 for an average pace and 150 for a fast one. They are ballpark figures, not rules: your own rate is the best reference, and the tool can measure it.

    Your text stays in your browser. It is never uploaded or saved. Only your settings (speed, pauses, teleprompter text size) are kept for your next visit.

    How to use it

    1. Paste the text into “Your text”. The “Word count” fills in by itself, along with characters, sentences and paragraphs. With no text, just type a word count.
    2. Pick a “Slow”, “Average” or “Fast” pace, or type a “Speed (words per minute)”.
    3. If you need to, add a “Pause between paragraphs” and, for a slide deck, the “Number of slides” and a “Pause per slide”.
    4. Read the “Estimated length” and the table comparing the three paces.

    “How many words for my time slot?” works the other way round. “Measure my speaking speed” times you reading a passage aloud (space bar to start and stop), then “Use this speed” applies your rate across the whole tool.

    How long is a 1,000 word speech?

    • At 130 words per minute, 1,000 words take 1,000 ÷ 130 = 7.69 minutes, which is 7 min 42 s. At 110 it is 9 min 5 s; at 150, 6 min 40 s.
    • Split the same text into 10 paragraphs with a 2-second pause between them: 9 pauses add 18 s, giving exactly 8 min. Add 5 slides at 10 s each and you reach 8 min 50 s.
    • A 5-minute presentation needs about 5 × 130 = 650 words, anywhere from 550 to 750 depending on your pace.
    • A best man or maid of honour speech of 3 to 5 minutes sits between 390 and 650 words. A one-minute elevator pitch is about 130 words.
    • Measuring yourself: the sample passage has 110 words. Read in 50 s, that is 110 × 60 ÷ 50 = 132 words per minute.

    Time markers and teleprompter

    Under “Time markers” the text is split “By paragraph”, “Every 30 seconds” or “Every minute”, with the start time of each part in the margin. At 130 words per minute, a 30-second chunk is about 65 words, so you know where you should be halfway through. “Copy with time markers” puts those times in brackets, such as [2:30], ready for your speaker notes.

    “Open the teleprompter” shows the text in large type on a dark background and scrolls it at the speed you chose: the whole text passes the reading line in exactly the calculated time, paragraph pauses included. The space bar pauses, the up and down arrows change the speed by 5 words per minute, “A−” and “A+” change the size, “Full screen” fills the screen and Esc closes it.

    Frequently asked questions

    How many words is a 10-minute speech?

    About 1,300 words at 130 words per minute, between 1,100 and 1,500 depending on pace. With 12 slides at 5 s each, the tool takes off 1 minute and suggests 1,170 words.

    How does the tool count words?

    A word is any run of characters between spaces that contains a letter or a digit: “don't” counts as one word, a lone dash does not. Each non-empty line counts as a paragraph.

    Why is my real time different?

    110, 130 and 150 words per minute are averages. Measure your own rate with the built-in stopwatch for a closer estimate.

    Is my text stored anywhere?

    No. It is neither uploaded nor saved: reload the page and the text box is empty. Only the settings are remembered.