Pizza dough worked out to the gram
This pizza dough calculator starts from what you want on the counter: a number of dough balls at a given weight. From that it works out how much flour, water, salt and yeast to weigh, using baker's percentages, the way pizza makers write their recipes. Every ingredient is a percentage of the flour weight: 65% hydration means 65 g of water for every 100 g of flour.
The calculator also matches the yeast to your rise time and kitchen temperature, then builds a schedule: when to mix, when to shape the balls and when to turn the oven on so the pizzas go in at the time you chose.
How to use it
- Pick a preset: "Neapolitan 250 g", "Thin Roman 180 g", "Family size 400 g" or "Sheet pan 30 × 40 cm 700 g". Or type the "Number of dough balls" and the "Weight of one dough ball (g)" yourself.
- Set the "Hydration" with the slider or the box, from 55 to 80%. "Salt (% of flour)" starts at 2.8%. Oil and sugar are optional: leave them at 0 if your recipe has none.
- Choose the "Yeast type", then the "Total rise time (hours)", from 4 to 48, and the "Rise temperature (°C)". The "Yeast (% of flour)" box fills itself in. Tick "Enter the yeast percentage myself" to use your own figure.
- Read the amounts in the table, next to the "Baker's %" column. Enter a "Target baking time" to get the schedule.
- "Copy recipe" puts the amounts and the schedule on the clipboard; "Print" gives a clean sheet without the rest of the page.
How the maths works
Adding up the percentages gives the weight of dough per unit of flour, so the target dough weight is divided by that sum: flour = total weight ÷ (1 + hydration + salt + yeast + oil + sugar), with each rate written as a fraction (65% = 0.65). Water, salt and yeast then follow from the flour.
Example: 4 dough balls of 250 g, so 1,000 g of dough, at 65% hydration, 2.8% salt and 0.2% fresh yeast. The sum is 1 + 0.65 + 0.028 + 0.002 = 1.68. Flour: 1,000 ÷ 1.68 = 595.2 g, rounded to 595 g. Water: 595.2 × 0.65 = 386.9 g, so 387 g. Salt: 595.2 × 0.028 = 16.7 g. Yeast: 595.2 × 0.002 = 1.19 g, so 1.2 g. Flour and water are rounded to the gram, salt and yeast to a tenth of a gram.
The yeast table
The fresh yeast rate comes from the table below, as a percentage of the flour. Between two cells the calculator blends the values smoothly. These are starting points: flour strength matters too.
| Temperature | 4 h | 8 h | 12 h | 24 h | 48 h |
|---|---|---|---|---|---|
| 4 °C (fridge) | 3% | 3% | 2% | 1% | 0.5% |
| 16 °C | 3% | 1.4% | 0.8% | 0.35% | 0.18% |
| 20 °C | 2% | 0.9% | 0.5% | 0.2% | 0.1% |
| 24 °C | 1.4% | 0.6% | 0.35% | 0.13% | 0.07% |
For dried yeast the fresh yeast rate is multiplied by 0.4 (active dry) or 0.33 (instant). In the example, 0.2% fresh yeast becomes 0.066% instant yeast, which is 0.4 g. With a sourdough starter the calculator uses 20% of the flour weight at 100% hydration: half of the starter is flour, half is water, and both are taken off the flour and water you add. The temperature is in degrees Celsius: 4 °C is about 39 °F, 20 °C is 68 °F and 24 °C is 75 °F.
The schedule
Mixing comes at the start of the rise time, shaping the balls one third of the time before baking (between 1 and 8 hours, to the quarter hour), and the oven goes on 45 minutes before. For a cold rise longer than 9 hours, an extra step reminds you to take the balls out of the fridge 3 hours ahead. With a 24-hour rise and baking at 8:00 PM: mix the day before at 8:00 PM, shape at 12:00 PM, oven on at 7:15 PM.
Which flour to use
Italian "00" pizza flour gives a soft, extensible dough and a thin, blistered crust, and it is now easy to find. Bread flour, with around 12 to 13% protein, is a good stand-in and copes well with long rises and hydration of 70% or more. All-purpose flour works for a same-day dough at 60 to 63%, but it slackens over a 48-hour cold rise.
Frequently asked questions
What does 65% hydration mean?
It is the weight of water compared with the weight of flour: 65 g of water per 100 g of flour. Higher hydration gives a more open, airier and stickier dough. Neapolitan pizza is often made at 60 to 68%, sheet pan pizza at 70 to 80%.
Why is the salt based on the flour and not on the dough?
That is how baker's percentages work: everything relates to the flour. 2.8% salt on 595 g of flour is 16.7 g, about 28 g per kilo of flour. Measured against the whole dough, that is roughly 1.7%.
My yeast weighs less than a gram: how do I measure it?
A scale that reads tenths of a gram makes it easy. Otherwise, dissolve 1 g of yeast in 100 g of the recipe water and pour off the share you need: for 0.4 g, use 40 g of that mixture, then add the rest of the water.
Are my settings saved?
Yes, they are stored in your browser on this device and nothing is sent anywhere. The "Default values" button goes back to 4 dough balls of 250 g, 65%, 2.8% salt, fresh yeast, 24 hours at 20 °C and baking at 8:00 PM.