Degrees to radians: the formula
To turn degrees into radians, multiply by π and divide by 180: rad = degrees × π / 180. The factor π/180 is about 0.0174533. A full turn is 360° or 2π radians, and a half turn is 180° or π radians, which is 3.14159 rad.
The converter above opens on 180° in radians. Type another angle in "Value" and the result updates as you type. The "Formula:" line shows the full factor, the "In every unit" table gives the same angle in gradians, arcminutes, turns and mils, and the ⇄ "Swap units" button converts radians back to degrees. If you start from radians, the page to convert radians to degrees is set that way.
Common angles chart
| Degrees | Radians (exact) | Radians (decimal) |
|---|---|---|
| 0° | 0 | 0 |
| 30° | π/6 | 0.523599 |
| 45° | π/4 | 0.785398 |
| 60° | π/3 | 1.0472 |
| 90° | π/2 | 1.5708 |
| 180° | π | 3.14159 |
| 270° | 3π/2 | 4.71239 |
| 360° | 2π | 6.28319 |
In precalculus and on the unit circle, answers keep π: 60° is written π/3, not 1.0472. To find the fraction, reduce degrees/180: 60/180 = 1/3, so π/3. For 135°, 135/180 = 3/4, so 3π/4. For lengths, areas and other quantities, the unit converter handles twelve.
Where radians are required
Your calculator
A calculator left in RAD mode reads sin(30) as the sine of 30 radians and shows −0.988 instead of 0.5. Check the DEG/RAD setting before a test, or convert first: 30° = 0.523599 rad, and sin(0.523599) = 0.5.
Spreadsheets and code
In Excel and Google Sheets, SIN, COS and TAN take radians, so write =SIN(RADIANS(30)). The same goes for Math.sin() in JavaScript and math.sin() in Python, where math.radians(30) returns 0.5235987755982988.
Arc length and calculus
The formula arc length = radius × angle only works with the angle in radians. A 45° arc on a circle with a 4 inch radius is 4 × 0.785398 = 3.14 inches long. Derivatives such as d/dx sin x = cos x also assume radians. For the full circumference, area or radius, switch to the circle calculator.
Frequently asked questions
What is 1 degree in radians?
1° = π/180 rad, or 0.0174533 rad. Ten degrees are 0.174533 rad.
Why is 180° equal to π radians?
One radian is the angle whose arc is as long as the radius. A circumference is 2π radii, so a full turn is 2π rad and a half turn is π rad.
How do I convert degrees, minutes and seconds?
Switch to decimal degrees first: 12° 30′ = 12 + 30/60 = 12.5°. Then 12.5° = 0.218166 rad. The tool also lists arcminutes and arcseconds under "From".
Should I round π to 3.14?
No need: the tool uses π to 15 decimal places. With 3.14, 180° would give 3.14 rad, an error of 0.05%.