Radians to degrees: 1 rad = 57.2958°
To convert radians to degrees, multiply by 180 and divide by π: degrees = rad × 180 / π. One radian is 57.2958°, or 57° 17′ 44.81″ in degrees, minutes and seconds. When the angle is written with π, just replace π with 180°: 3π/4 rad = 3 × 180 / 4 = 135°. For the reverse, see the page to convert degrees to radians.
The converter above opens on 1 rad in degrees. When the answer is not a whole number of degrees, it is also written in degrees, minutes and seconds in brackets. The "Formula:" line gives the 180/π factor to twelve digits, and the ⇄ "Swap units" button goes back to radians. Gradians, turns and arcminutes are in the unit converter.
Radians to degrees chart
| Radians | Decimal value | Degrees |
|---|---|---|
| 0 | 0 | 0° |
| π/6 | 0.523599 | 30° |
| π/4 | 0.785398 | 45° |
| π/3 | 1.0472 | 60° |
| π/2 | 1.5708 | 90° |
| π | 3.14159 | 180° |
| 3π/2 | 4.71239 | 270° |
| 2π | 6.28319 | 360° |
Without π, the answer is rarely a round number: 0.5 rad = 28.6479°, 2 rad = 114.592° and 3 rad = 171.887°, a little under half a turn.
Where radians come from
Code and spreadsheets
Inverse trig functions return radians. In Python, math.atan(0.5) gives 0.463648: a ramp that rises 1 ft over 2 ft is at 26.5651°, or 26° 33′ 54.18″. math.degrees() does the conversion. In a spreadsheet, =DEGREES(ATAN(0.5)) shows 26.5651 directly. Starting from the sides, the triangle calculator gives the angles in both degrees and radians.
Physics and mechanics
Angular velocity is measured in rad/s. A wheel spinning at 1 rad/s turns 57.2958° per second, which is 9.5493 RPM. A servo rated for 2.5 rad of travel sweeps 143.239°.
Mental math
Multiply by 57.3. For 3 rad, 3 × 57.3 = 171.9°, within a tenth. It also helps to remember that a radian is a little under 60°, the angle of an equilateral triangle.
Frequently asked questions
How many degrees is 1 radian?
180/π degrees, or 57.2957795°. It is not a round number because π is irrational.
How do I convert 2π/3 rad?
Replace π with 180: 2 × 180 / 3 = 120°. This works for any fraction of π.
What does RAD mean on my calculator?
RAD mode reads and returns angles in radians. In DEG mode, arccos(0) shows 90; in RAD mode it shows 1.5708, which is π/2.
Is an angle larger than 2π valid?
Yes, it counts more than one turn: 10 rad = 572.958°, one turn plus 212.958°. The tool does not wrap the angle back between 0° and 360°.