A free business card maker for printing at home
This business card maker lays out cards at 85 × 55 mm, the standard size in the UK and most of Europe. Type your name, job title, company, phone, email, website and address; the card arranges itself, and any line that is too long shrinks to fit. Eight clean designs are included (Classic, Thin frame, Side band, Line, Corner, Dark, Two-tone, Header), in 8 colours and 2 lettering styles.
Each A4 sheet holds 10 cards with crop marks and registration marks, plus an optional back side. Your details never leave your device: everything is drawn in the browser.
How to use it
- Fill in "Full name", "Job title" and, if needed, "Company (optional)".
- Add "Phone", "Email", "Website" and "Address (up to 2 lines)". Empty fields are left off the card.
- Choose a "Design", a "Colour" and the "Lettering"; untick "Icons before the contact details" for a plainer look.
- For a QR code, pick "Link to the website" or "Contact card (vCard)", then decide on the "Back of the card".
- Set the "Number of sheets" and click "Print or save as PDF".
10 cards per A4 sheet, cut in the right place
The cards sit edge to edge in 2 columns and 5 rows: 2 × 85 = 170 mm wide and 5 × 55 = 275 mm tall. That leaves 20 mm of margin left and right and 11 mm top and bottom. The crop marks sit in those margins, exactly in line with each cut: 3 at the top, 3 at the bottom, 6 on each side. Lay a ruler from one mark to the opposite one and cut with a craft knife, or use a paper trimmer. The two round registration marks in the side margins help you check that front and back line up. If you cut with scissors, tick "Grey outline around each card".
Note for US readers: the American standard is 3.5 × 2 in (88.9 × 50.8 mm). These cards are 85 × 55 mm, slightly narrower and taller, and still fit most card holders. On Letter paper, print at 100% and check the size with a ruler.
The back side and two-sided printing
The "Back of the card" can show the colour with your company name and website, a large QR code, or the colour with your initials. Each sheet then prints as two pages, and the back page has its columns swapped. Choose two-sided printing with "flip on long edge": when the sheet turns over, the left card ends up on the right, so every back lands behind its front.
The QR code: link or contact card
"Link to the website" opens your site with one scan. "Contact card (vCard)" saves your name, title, company, phone, email, website and address straight into the phone's contacts. The code is static: it holds the information itself, with no redirect, and never expires. For a standalone code in colour or at a large size, use the QR code generator.
The tool shows the printed size of the modules. Example: a short website link gives a 29 × 29 code; on the Classic design, where the code is 18 mm wide, each module is 0.55 mm and scans easily. A full contact card grows to 61 × 61 modules: on the front they shrink to 0.25 mm, too small for many phones. Choose "QR code on the back" instead: the code is then 30 mm wide with 0.46 mm modules.
Tips for a good card
- Use 250 to 350 gsm (about 90 to 130 lb cover) matte card stock, if your printer accepts it.
- Print at "Actual size" or 100%, otherwise the card is no longer 85 × 55 mm.
- Stay consistent: the email signature generator can reuse the same colour and details.
Frequently asked questions
Can I get the card as an image?
Yes. "Front as PNG" and "Back as PNG" each save a 1,004 × 650 pixel image, which is 85 × 55 mm at 300 dpi, ready for a print shop or a post.
Is it suitable for freelancers?
Yes: a job title, a phone number and a website are enough. When the first job comes in, the invoice generator uses the same details.
Are my details saved?
The design, colour and settings are kept for your next visit. Your name, phone, email and other details stay on this device only if you tick "Keep my details on this device". Nothing is sent.
How do I get a PDF?
Click "Print or save as PDF" and choose "Save as PDF" instead of a printer. The file keeps the cards at their real size.