SuperDevTools

Refresh rate test: check your monitor's Hz

Your screen's refresh rate

–

Measured value: –

Measuring… keep this page in front for 3 seconds.

Space bar: measure again. Esc: stop the moving tests.

Median interval between frames
–
Dropped frames
–
Stability (standard deviation)
–
Frames analysed
–

Why the reading can be wrong

  • A background tab or battery saver mode slows refreshes down: keep the page visible and your laptop plugged in.
  • With several monitors, the reading applies to the screen showing the window. Move the window, then measure again.
  • Some browsers or settings cap the display at 60 Hz, even on a faster monitor.

Visual tests

Caution: these tests show shapes moving quickly. If you are sensitive to motion or flashing, don't start them. They only start when you click and stop with the same button or the Esc key.

Smoothness test

All three strips move at the same speed. The first one updates on every refresh, the second on every other refresh, the third on every fourth. The faster your screen refreshes, the smoother the first strip looks.

–

–

–

Motion clarity test

The top checkerboard stays still, the bottom one moves on every refresh. Follow it with your eyes: if its squares look grey, blurry or leave a trail, the screen loses sharpness in motion. This blur usually shrinks as the refresh rate goes up.

Still

Moving

Everything is calculated in your browser: nothing is sent or stored, except the speed you pick, kept on this device.

A monitor Hz test that runs in 3 seconds

Refresh rate, measured in hertz (Hz), is how many times per second your screen redraws the picture. Most office monitors run at 60 Hz, gaming monitors at 144, 165 or 240 Hz. This refresh rate test measures the rate your browser is actually getting, as soon as the page opens.

The large number under Your screen's refresh rate is the closest standard rate (60, 75, 90, 100, 120, 144, 165, 240 or 360 Hz). The Measured value below it shows the exact figure to two decimals. Everything runs in your browser and nothing is sent anywhere.

How to use it

  1. Open the page and leave it alone for 3 seconds while the bar fills up.
  2. Read the four boxes: Median interval between frames, Dropped frames, Stability (standard deviation) and Frames analysed.
  3. If the reading is marked unstable, click Measure again or press the space bar.
  4. Under Visual tests, pick a Scrolling speed and click Start test.

How the measurement works

Every time the screen refreshes, the browser tells the page. The tool records those moments for 3 seconds, takes the median gap between them and throws out values that are far off. The refresh rate is 1,000 divided by that gap in milliseconds.

Refresh rateGap between framesFrames in 3 s
60 Hz16.667 ms180
120 Hz8.333 ms360
144 Hz6.944 ms432
165 Hz6.061 ms495

Example: on a 144 Hz monitor, a gap of 20.8 ms covers three refreshes, so the tool counts 2 dropped frames. A TV running at 59.94 Hz shows “60 Hz” in large type and “59.94 Hz” as the measured value.

Why the test says 60 Hz on a 144 Hz monitor

A high refresh rate monitor only uses its full speed when the whole chain supports it:

  • System setting: new monitors often stay at 60 Hz until you change it. Open your computer's advanced display settings and pick the highest rate.
  • Cable and port: an older HDMI cable or an adapter can cap the signal at 60 Hz at high resolutions.
  • Browser: turning off hardware acceleration, or some privacy settings, can limit pages to 60 Hz.
  • Second monitor: the reading applies to the screen showing the window. Drag the window across and measure again.

The visual tests

The Smoothness test scrolls three strips of geometric shapes at the same speed. The first updates on every refresh, the second on every other refresh, the third on every fourth. At 144 Hz that gives 144, 72 and 36 fps. At 960 px/s, each shape jumps 16 px per frame at 60 Hz but only 6.67 px at 144 Hz, which is why motion looks choppier on the slower screen.

The Motion clarity test places a still checkerboard above a moving one. If the moving squares look grey or leave a trail, your screen loses sharpness in motion. Both tests only start when you click and stop with the Esc key; skip them if you are sensitive to motion.

FAQ

Is this refresh rate test accurate?

Yes, when the result is marked stable and the tab stays in front. With many dropped frames, close heavy programs and measure again.

Why do I get 30 or 40 Hz?

Battery saver, a background tab or a busy computer slows down refreshes. The monitor itself is not the cause.

What is the difference between Hz and fps?

Hz belongs to the screen, fps to the game or video. A game running at 200 fps on a 60 Hz monitor still only shows 60 pictures per second.

My phone shows 60 Hz instead of 120 Hz. Why?

Many phones drop to 60 Hz in the browser or in power saving mode. Check the motion smoothness or refresh rate option in your display settings.