Use your screen as a light
This ring light online fills your screen with steady light, plain white or tuned in kelvins like a light bulb. On a laptop it brightens your face; on a phone it works as a flashlight online when you would rather not hunt for the torch button. The “Ring” shape draws a glowing frame around a black centre, the way a ring light does. Nothing is installed or uploaded, and your last settings stay on your device.
How to use it
- Pick one of the “Presets”: “Cool white” (6,500 K), “Neutral” (4,000 K), “Warm” (2,700 K), “Candle” or “Night red”.
- Or set a “Colour temperature” between 2,700 and 6,500 K yourself, or switch to “Any colour”.
- Adjust “Brightness”, then choose “Full screen” or “Ring” and its “Ring thickness”.
- Click “Turn on” or press the space bar. “Flashlight” goes straight to pure white at 100%.
- While lit, the up and down arrows change brightness and left and right change the temperature. Press Esc or “Turn off” to come back.
The pointer and the “Turn off” button fade after 3 seconds; move the mouse or tap to bring them back. Where the browser supports it, the screen is kept awake while the light is on.
Colour temperature, explained
Warm light leans orange, cool light leans blue. A 2,700 K bulb is the cosy living-room kind, 4,000 K is typical office lighting and 6,500 K matches daylight on an overcast day. The tool turns kelvins into RGB with a published approximation fitted to black-body measurements. Exact results: 2,700 K gives RGB 255, 167, 87 (#FFA757) and 6,500 K gives 255, 254, 250, almost pure white.
“Brightness” scales each channel: at 50%, the 2,700 K white becomes 128, 84, 44. At 100% the colour is untouched. How much light you actually get depends mostly on your display's own brightness setting, so turn that up first.
Everyday uses
- Video calls: snap the call window next to this page, or put a second monitor in front of you in “Ring” mode. On a 1,920 × 1,080 screen at 12%, the ring is 130 pixels wide and leaves a 1,660 × 820 black centre.
- Make-up: check your foundation under “Cool white”, then “Warm”, to see it in daylight and in evening lighting.
- Reading in the dark: “Night red” shows red at 25%, gentle enough not to wake your partner.
- Finding things behind the sofa or in the car footwell: tap “Flashlight” on your phone and point the screen at the spot.
SOS signal and limits
The “SOS signal” flashes the screen in Morse code: three 0.5-second flashes, three 1.5-second flashes, three short ones again, then a pause. One cycle takes 17 seconds, with never more than one flash per second. It stays locked until you tick “I have read the warning”, and it is disabled when your device asks for reduced motion.
A screen is not a real lamp: there is no beam, and the light fades quickly beyond about a metre. Keep a proper torch for power cuts.
Frequently asked questions
Does this turn on my phone's camera flash?
No. A web page cannot control the flash, so the screen itself lights up in white at 100%.
Why does my screen still go to sleep?
Keeping the screen awake depends on the browser. If it is not supported, a message says so: tap the screen now and then.
Which temperature works best for video calls?
Between 4,000 and 5,000 K skin tones look natural. Under warm bulbs, go down to about 3,000 K so your face is not lit in two different shades.
Is this light bad for my eyes?
It is no brighter than your screen in normal use. At night, use “Night red” or a low brightness.