SuperDevTools

White screen: full screen white page

Click the color or “Full screen”. To go back: press Esc or click anywhere. The pointer is hidden and the screen stays on. Up and down arrows: brightness.

Colors

Nothing is sent: everything happens in your browser.

A plain white screen, right away

This page shows a plain white screen with no text and no logo. The large box at the top already shows the color: click it, or click “Full screen”, and your whole display turns white. The pointer disappears, screen sleep is blocked when the browser allows it, and you come back with Esc or a single click.

A white screen is handy for more than you might think: lighting a face or an object, spotting dirt on the panel, tracing a drawing on a tablet or checking that no pixel stays dark. For a light you can tune by color temperature, with a ring mode, open the online ring light.

How to use it

  1. Pick a color: “Pure white” (shown by default), “Neutral white 4000 K” or “Warm white 2700 K”.
  2. If needed, set the “Brightness” anywhere from 10 to 100%.
  3. Click the white box or “Full screen”. The space bar does the same.
  4. In full screen, the up and down arrows change the brightness in 5% steps.
  5. Press Esc or click anywhere to go back. Your last setting is kept for next time.

Four practical uses

Lighting

At full brightness, a laptop screen lights a face well enough at about 20 inches. Warm white is kinder to skin tones in the evening; pure white keeps colors true when you photograph an item to sell online.

Cleaning the screen

Against white, fingerprints, splashes and small dark specks stand out clearly. Then switch the device off before wiping it with a dry or barely damp microfiber cloth. Fine dust, on the other hand, shows up better on a black screen under light coming from the side.

Tracing a drawing

Lay a thin sheet of paper on a tablet lying flat, show the white screen at 100% and the picture underneath shows through. Tape the edges and trace lightly: a pencil tip pressed hard can scratch the glass.

Finding a dead pixel

A dead pixel stays black whatever is on screen, so on white it shows as a dark dot. A 1920 × 1080 display has 2,073,600 pixels, and every one of them should light up here. For a full check in nine colors, run the dead pixel test.

What the brightness slider does

The page brightness darkens the color itself: at 50%, pure white becomes a gray of RGB 128, 128, 128 (#808080). It does not change your device's backlight. To get more light, also raise the screen brightness in your system settings. The exact code of the color on screen is shown next to the button.

Frequently asked questions

How do I exit the white screen?

Press Esc or click anywhere on the screen. On a phone, tap the screen once.

Will my screen turn off by itself?

Not if your browser agrees to block screen sleep: a message confirms it when you start. If it cannot, tap the screen now and then or lengthen the sleep delay in your settings.

Is the white really #FFFFFF?

Yes. With “Pure white” and 100% brightness, every pixel gets RGB 255, 255, 255. A night mode or blue light filter turned on in your device can still make it look yellowish: switch it off for a neutral white.