SuperDevTools

Metal Weight Calculator

Units
Section dimensions
Diagram of the cross-section with the dimensions to enter

For guidance only, not to scale.
Total weight —

Theoretical weight based on nominal dimensions. Actual weight varies with manufacturing tolerances and the rounded edges of sections.

Your last calculation stays on this device and comes back on your next visit.

How much does your metal part weigh?

This metal weight calculator gives the cross-section, the weight per metre (or per foot) and the total weight of a metal part from its dimensions, updated as you type. It covers eleven shapes used in fabrication, welding and machining: sheet or plate, round bar, round tube, square or rectangular tube, square bar, flat bar, hex bar, equal and unequal angle, T bar and wire. Thirteen metals are listed, from steel to silver, and you can enter the density of any other alloy.

Use it to order stock from a metal supplier, price a gate or a handrail, check that a trailer or a mezzanine can take the load, or estimate shipping costs for a bundle of bars.

How to use it

  1. Pick the "Material". For an alloy that is not listed, choose "Other metal (custom value)" and fill in "Density (g/cm³)".
  2. Pick the "Shape". A diagram of the cross-section shows the letters of the dimensions to enter: b, t, d, D, h, a or s.
  3. Enter the "Section dimensions", then the "Length" and the "Quantity".
  4. Optional: enter a "Price per kg" (or "Price per pound") to get the "Total cost".
  5. Switch between "mm and kg" and "inches and pounds" at the top. Values you have already typed are converted, so you can enter a plate in inches and still read its weight in kg.

In inches and pounds, the dimensions are in inches, the length in feet or inches, and the results in in², lb/ft and lb. Your last calculation is saved on your device.

The formulas

Every result comes from one product: weight = cross-section × length × density × quantity. With the cross-section in mm² and the density in g/cm³, the weight per metre is simply area × density ÷ 1,000, in kg/m.

  • plate and flat bar: A = b × t
  • round bar and wire: A = π × d² ÷ 4
  • round tube: A = π × (D² − (D − 2t)²) ÷ 4
  • square or rectangular tube: A = b × h − (b − 2t) × (h − 2t)
  • square bar: A = a²; hex bar measured across flats: A = (√3 ÷ 2) × s²
  • angle: A = t × (a + b − t), which is t × (2a − t) for an equal angle
  • T bar, same thickness for flange and stem: A = b × t + (h − t) × t

Worked examples

A standard 4 ft × 8 ft steel plate, ¼ in thick, is 48 × 96 × 0.25 = 1,152 in³, or 18,878 cm³. At 7.85 g/cm³ it weighs 148.19 kg, which is 326.71 lb. A 1 in steel round bar has an area of 0.7854 in² and weighs 2.673 lb/ft.

In metric, a 1,000 × 1,000 × 1 mm steel sheet weighs exactly 7.85 kg, and the same sheet in aluminium (2.70 g/cm³) weighs 2.70 kg. A 48.3 × 3.2 mm tube, the usual scaffold and handrail size, has an area of 453.39 mm² and weighs 3.559 kg/m. A 50 × 50 × 5 angle gives 5 × (2 × 50 − 5) = 475 mm², so 3.729 kg/m in steel.

Steel sectionCross-sectionWeight
Round bar Ø 20 mm314.16 mm²2.466 kg/m
Flat bar 40 × 5 mm200 mm²1.570 kg/m
Square tube 2 × 2 × ⅛ in0.9375 in²3.190 lb/ft
Hex bar 22 mm across flats419.16 mm²3.290 kg/m

With a price: ten 6 m lengths of 20 mm round bar weigh 147.969 kg; at 1.80 per kg the total cost is 266.34 in your currency.

Why supplier tables can differ

The calculator assumes sharp corners and exact dimensions. Real stock differs in three ways:

  • Corner radius of square and rectangular tube. Cold-formed tube has rounded corners. Catalogues list 2 × 2 × ⅛ in tube at about 3.05 lb/ft, against 3.190 lb/ft here: roughly 4% less.
  • Root and toe radii of rolled sections. An angle or T bar has a fillet where the legs meet, which adds metal, and rounded leg tips, which remove some. The net effect is usually under 2%.
  • Rolling tolerances. A plate sold as ¼ in can be a little thicker or thinner, and density varies slightly from one alloy to another.

For a quote or a load check, add a few percent of margin, and use your supplier's weight when material is invoiced by weight.

Frequently asked questions

What density should I use for steel?

7.85 g/cm³ (7,850 kg/m³, or about 0.2836 lb/in³) is the usual value for mild steel. Stainless is a little heavier (7.93 to 7.98) and cast iron a little lighter (around 7.2).

How do I find the weight of a plate per square foot?

Choose "Sheet or plate" and switch to inches and pounds: the result shows "Weight per square foot". A ¼ in steel plate weighs 10.21 lb/ft²; in metric, a 3 mm plate weighs 3 × 7.85 = 23.55 kg/m².

Do I enter the inside diameter of a tube?

No. Enter the outside diameter D and the wall thickness t, as listed in catalogues. The inside diameter is D − 2t.

Can I mix units, for example inches and kilograms?

The main result follows the unit system you pick, and the total in the other unit is always shown under "Total weight, other unit". So in inches and pounds you still see the weight in kg.