How much water does your household use?
This water usage calculator adds up every use in a home (showers, baths, toilet flushing, washing machine, dishwasher, washing up by hand, cooking and drinking, garden watering, swimming pool and leaks) and gives you the usage per person per day, the volume per year and the yearly cost. A bar chart shows which use weighs most, and a savings section puts a number on a few simple changes. Everything is calculated in your browser.
Use it to make sense of a rising water bill, check a meter reading against an estimate, or decide whether a low-flow showerhead is worth buying.
How to use it
- Under "Household", enter the "Number of people" and the "Water price per m³". The starting price is tagged "example": replace it with the price on your bill, sewer charges included.
- In the US? Set "Units" to "US gallons". Volumes switch to gallons, flow rates to gal/min, the garden to square feet and inches, and the price to "per 1,000 gal", which is how many US bills show it.
- Fill in each use: "Shower length (min)", "Showerhead flow rate", "Showers per week per person", then toilets (tick "Dual flush" if you have one), laundry and dishwasher cycles, watering and "Pool water per year". An empty field counts as zero.
- Add any dripping taps or leaking toilets under "Leaks", then read the "Result" and tick the measures in "Simulate savings".
The method
Each use is turned into a daily volume for the household (a week is 7 days, a year 365 days). A shower uses its length times the flow rate: 8 minutes at 12 L/min is 96 litres, about 25.4 US gallons. With a 6 L/min showerhead the same shower drops to 48 litres. In gallons, 8 minutes at 2.5 gal/min is 20 gallons. Watering is area × water per watering × waterings per week × weeks per year. The daily total times 365 gives the yearly volume, which is multiplied by your price.
| Case | Working | Result |
|---|---|---|
| 8-minute shower at 12 L/min | 8 × 12 | 96 L |
| Same shower at 6 L/min | 8 × 6 | 48 L |
| Dripping tap at 4 L/h | 4 × 24 × 365 | 35,040 L (35.04 m³) a year |
| Running toilet at 25 L/h | 25 × 24 | 600 L a day |
Example: one person who switches to 6 L/min and showers daily saves 48 litres a day, or 17.52 m³ a year. At the example price of 4 per m³, that is 70.08 a year in your currency.
Comparing with care
The result is set against a commonly quoted ballpark figure: about 150 litres per person per day in several European countries. It is not a standard, and North American figures are often higher because of lawns and larger homes. Household size, garden and climate change the numbers a lot. Your own meter is the best benchmark: read it twice, a week apart.
Ways to use less water
- Fit a low-flow showerhead or a flow restrictor.
- Cut a couple of minutes from each shower.
- Use the small button of a dual flush toilet.
- Water the garden in the evening, at the roots, and collect rainwater.
- Fix leaks: turn off every tap, note the meter, and check it again two hours later without using any water.
Frequently asked questions
What is the average water usage per person?
A figure often quoted for Europe is around 150 litres (about 40 US gallons) per person per day, but it varies widely between homes. Enter your own values to get yours.
How do I measure my shower's flow rate?
Hold a marked bucket under the showerhead on full for 10 seconds, then multiply what you collected by 6 to get litres or gallons per minute.
Are the leak rates accurate?
No. The values offered (4 L/h for a dripping tap, 25 L/h for a running toilet) are estimates. A real leak is best measured at the meter.
Why is the water price only an example?
Prices differ from one town and country to another and change over time. The tool gives no rate: use the total price per m³ or per 1,000 gallons from your bill, leaving out fixed charges.