How much will solar panels produce, and when will they pay for themselves?
This solar panel calculator estimates the yearly output of a photovoltaic system from its peak power, the specific yield of your area, and the orientation and tilt of the roof. It then splits that output between what you use at home and the surplus sent to the grid, and works out your bill savings, export income, simple payback period and cumulative gains over 20 or 25 years.
Every price is entered by you: the tool holds no export rate and no incentive amount. Enter the export rate or incentives that apply in your country when you plan the project. The answer is an estimate that only an on-site survey by a professional installer can confirm.
How to use it
- Under Power input, pick Total peak power (kWp), or Number of panels × power of one panel if your quote only lists panels (for example 8 panels of 375 Wp = 3 kWp).
- Fill in the Specific yield (kWh/kWp/year). The Rough guide buttons run from 900 to 1,500: they are wide ranges, and a local estimate for your address is always better.
- Choose the Orientation and Tilt, then adjust System losses (%) (14% by default).
- Enter your Yearly household consumption (kWh) from your bills and a Self-consumption rate (%), or let the tool estimate it.
- Enter the Price of electricity bought (per kWh), the Export rate for the surplus, the System cost and any Incentives deducted, then the yearly price rise and panel degradation. In English, you can also choose the currency.
Results update as you type, with a cumulative balance chart and the full working.
A worked example
Take a 3 kWp system facing south at 30-35°, in an area with 1,200 kWh/kWp/year and 14% losses: 3 × 1,200 × (1 − 0.14) = 3,096 kWh a year. With a 50% self-consumption rate, 1,548 kWh are used at home and 1,548 kWh are exported. The prices below are only illustrative.
| Item | Working | Result |
|---|---|---|
| Yearly bill savings | 1,548 × $0.25 | $387.00 |
| Yearly export income | 1,548 × $0.10 | $154.80 |
| Total gain in year one | 387 + 154.80 | $541.80 |
| Simple payback period | 7,500 ÷ 541.80 | 13.8 years |
With 0.5% degradation a year and a flat electricity price, cumulative gains reach $10,336.41 over 20 years and $12,762.61 over 25 years, a net result of $5,262.61 once the $7,500 is paid back. If you expect electricity to rise by 3% a year, the 25-year total climbs to $16,839.86 and the cost is covered after about 12.5 years instead of 14.3.
Before you rely on the figure
- The orientation and tilt table is an approximation for a mid latitude. A chimney or tree casting a shadow can cost far more than it shows.
- Self-consumption depends on when you are home. A household out all day uses little of its own output; the automatic estimate is deliberately rough.
- The monthly split follows a simple seasonal profile: about 372 kWh in June and 124 kWh in December for the example. Tick Southern hemisphere to shift it by six months.
- Inverter replacement, maintenance and insurance are not included: add them to the system cost.
Frequently asked questions
What specific yield should I use?
Use a local estimate for a south-facing system at your address. Without one, think of roughly 900 to 1,000 kWh/kWp/year in cloudy northern areas and 1,400 to 1,500 or more in sunny southern ones, keeping in mind these are only orders of magnitude.
Why do the two payback lines differ?
The Simple payback period divides the net cost by the year-one gain. Payback with degradation and price rise works year by year: output drops slightly each year and the price you pay for electricity follows the rise you entered.
Does the export rate rise with electricity prices?
No. The tool keeps the export rate fixed for the whole simulation, like a fixed-price contract. Only the price of electricity bought changes.
Can this replace a quote?
No. It checks orders of magnitude and compares scenarios. Ask a professional installer for a survey, and run each quote through the tool with the same assumptions.