Decode resistor bands in seconds
Through-hole resistors don't print their value: they carry colored bands. This resistor color code calculator reads 4, 5 and 6 band resistors following IEC 60062. It shows the resistance in Ω, kΩ or MΩ, the tolerance, the actual range and, for 6 bands, the temperature coefficient. It also works backwards, from a value to its colors, and decodes SMD resistor markings.
How to use it
- Under "Number of bands", pick 4, 5 or 6 bands.
- Choose the color of each band. Every color is spelled out with its meaning, so you never rely on the swatch alone. The drawing updates as you go.
- Read the "Resistance value", the "Tolerance" and the "Actual value between" line.
- In "From value to colors", type a value in "Value in ohms":
4.7k,4k7,220,1M5or2R2. You get the 4 and 5 band colors, the SMD codes and the nearest standard value in the E6, E12, E24, E48 and E96 series. "Show on the resistor" puts those colors on the drawing. - In "SMD resistor code", type the code printed on the part.
Which way to read the bands
Hold the resistor with the isolated band on the right: the tolerance band sits after a wider gap. Gold and silver never come first, so if one end shows gold or silver, that is the end you read last. On 4 bands you read two digits, a multiplier (how many zeros to add) and the tolerance. On 5 bands, three digits, then the multiplier and the tolerance. A sixth band gives the temperature coefficient in ppm/K.
Worked examples
- Yellow, violet, red, gold: 4, 7, two zeros, so 4,700 Ω = 4.7 kΩ ±5%. The real part measures between 4.465 kΩ and 4.935 kΩ.
- Brown, black, black, red, brown: 100 × 100 = 10 kΩ ±1%, between 9.9 and 10.1 kΩ.
- Red, red, black, black, brown, red: 220 Ω ±1%, 50 ppm/K. If the part warms up by 40 °C, it drifts by about 220 × 50 × 40 / 1,000,000 = 0.44 Ω.
- Backwards,
1M5(1.5 MΩ) gives brown, green, green: 15 followed by five zeros, then the tolerance band. - You won't find a 4.8 kΩ resistor in the E24 series: the tool suggests 4.7 kΩ, 2.08% lower.
A memory aid
Digits 2 to 7 follow the rainbow: red, orange, yellow, green, blue, violet. Put black (0) and brown (1) in front, gray (8) and white (9) at the end. If you prefer a sentence, "Better Be Right Or Your Great Big Venture Goes West" gives the initials from black to white. Gold divides by 10, silver by 100.
SMD resistor codes
Surface mount parts carry a printed code instead of bands. With 3 digits, the first two are the value and the last one is the number of zeros: 472 = 4.7 kΩ. With 4 digits, three digits then the zeros: 1002 = 10 kΩ. An R stands for the decimal point: 4R7 = 4.7 Ω. EIA-96 pairs a number from 01 to 96 (the position in the E96 series) with a multiplier letter: 01C = 100 × 100 = 10 kΩ.
FAQ
How do I tell brown from red, or red from orange?
Under warm indoor light those shades blur together. Look at the part in daylight and, if in doubt, measure it with a multimeter while it is out of the circuit.
What if there is no tolerance band?
A resistor with only three bands has a ±20% tolerance. In 4 band mode, pick "no band" as the tolerance.
Why can't I buy the exact value I calculated?
Manufacturers stick to the standard series: 12 values per decade in E12, 24 in E24, 96 in E96. The tool shows the nearest value in each series.
Does a blue or beige body change anything?
No. A beige body often means a carbon film resistor and a blue body a more precise metal film one, but the code reads the same way.