SuperDevTools

Online mic test

Everything stays on your device: no sound is sent to or stored on the site. The microphone only opens when you click, and "Turn off microphone" stops it.

Sound level –
Start the test to see whether sound is picked up.
Peak
–
Background noise
–

Speak for a few seconds in a normal voice to get a tip.

Test recording

Check your microphone in thirty seconds

This online mic test shows whether your microphone picks up your voice, how loud it comes through and how much noise surrounds it. Use it before a work meeting, an online class or a podcast recording. To check your camera on the same page, open the webcam and mic test.

How to use it

  1. Click "Test microphone" and accept the access request. Nothing is requested before that click.
  2. Speak normally. The "Sound level" bar moves, the graph draws your voice over the last 10 seconds, and the message "Sound is being picked up." appears.
  3. If you have several microphones (the laptop's built-in one, your headset, a desk mic), pick the right one under "Microphone in use" and watch the bar react.
  4. Read the two figures: "Peak" and "Background noise". Below them, a tip tells you whether the level is fine, too quiet or clipping. "Reset" starts the measurement again, for instance after you move the mic.
  5. Choose a "Length" of 5 or 10 seconds, click "Record a test", talk, then play it back in the player that appears. "Download recording" saves it to your device if you want to keep it.

Reading the peak and the background noise

Values are in decibels below full scale: 0 dB is the loudest sound the microphone can pass on, so everything else is negative. The peak is the loudest point reached since you started. The background noise is the level of the pauses between your sentences, measured over the last 10 seconds.

Example: a peak of -10 dB with background noise at -58 dB leaves a 48 dB gap, which is excellent for a call. A peak of -1 dB or higher means clipping: your voice crackles and you should lower the input volume. A peak below -30 dB means people will struggle to hear you. Background noise above -45 dB points to a noisy room, a fan or a hissing mic. To measure how loud the room itself is, use the sound level meter.

If "No sound received" appears, the microphone is sending perfect silence. That is nearly always a mute switch, the wrong mic in the list or access turned off in your system settings, not a mic that is simply too quiet.

Your voice stays on your device

Everything runs in your browser. No sound is sent to or stored on the site. The test recording stays on the page and disappears when you close it. The microphone turns off with "Turn off microphone" and as soon as you switch tabs. For longer recordings, try the online voice recorder.

Frequently asked questions

Why is my mic not working?

Four causes come up again and again. Permission was denied: click the icon to the left of the site address, allow the microphone and reload, then check your system's privacy settings. Another app is already using it: close the video call app or the tab that has it. The wrong device is selected: change it under "Microphone in use". Finally, a missing or outdated audio driver can block access: update it and restart.

What level should I aim for on a call?

A peak between -20 and -6 dB when you speak normally, and background noise below -50 dB. The tip under the figures tells you straight away.

Is my recording uploaded anywhere?

No. It stays in your browser. Only a click on "Download recording" copies it to your device.