SuperDevTools

EV charging time and cost calculator

Battery

Use the usable (net) capacity, the part the car can actually use, often given in the spec sheet: it is a little smaller than the gross capacity.

Charging point
AC charging
DC rapid charging

On AC, the car's onboard charger converts the current: a 22 kW charger only delivers 11 kW to a car with an 11 kW onboard charger. Leave blank if you don't know it.

Some electricity is lost as heat in the cable, the charger and the battery. 90% is a typical figure on AC, 95% on DC, where conversion happens inside the charger. Switching current type restores the default value.

Cost and range
Step-by-step calculation

Your settings are kept on this device for your next visit.

How long does an electric car take to charge?

This EV charging time calculator works from three figures: the usable battery capacity, the starting and target charge level, and the power of the charging point. It takes into account the limit of the car's onboard charger, charging losses and, on rapid chargers, the slowdown above 80%. It also shows the energy drawn from the grid, the finish time, the EV charging cost and the range added, in miles or kilometres.

Use it to check whether a night on a household socket is enough, to compare a 7.4 kW wallbox with an 11 kW one, or to plan a stop at a motorway rapid charger. No make or model is stored: you enter your own car's figures.

How to use it

  1. Under "Battery", fill in "Usable capacity (kWh)", "Starting level (%)" and "Target level (%)".
  2. Pick a preset: household socket 2.3 kW, reinforced socket 3.7 kW, wallbox 7.4, 11 or 22 kW, or rapid charger 50, 150 or 350 kW. "Current type" and "Charging efficiency (%)" follow automatically (90% on AC, 95% on DC).
  3. On AC, enter the "Car's onboard charger (kW)"; on DC, the "Car's maximum DC power" if you know it, and tick or untick "Slow down above 80%".
  4. Under "Cost and range", add a "Start time", a "Price per kWh" or separate off-peak and peak rates, and your efficiency. English pages default to mi/kWh (3.6); switch to kWh/100 km if you prefer. You can also compare with a petrol car in mpg (US).

Results update as you type, and the "Step-by-step calculation" box shows every operation.

How the maths works, with examples

Energy to add = capacity × (target − start). The power used is the lower of the charger's power and what the car accepts. The battery receives that power multiplied by the efficiency; the rest is lost as heat.

60 kWh battery, 20% to 80%Result
Energy added36 kWh
7.4 kW wallbox, 90% efficiency40 kWh from the grid, 5 h 24 min
Cost at 0.25 per kWh10.00
50 kW rapid charger, 95% efficiency37.89 kWh from the grid, 45 min
Cost at the same 0.25 per kWh9.47
Range added at 3.6 mi/kWh130 miles

Plugged into the 7.4 kW wallbox at 10:30 pm, the car finishes at 03:54 am the next day, well inside a typical overnight off-peak window. On a 22 kW charger, a car with an 11 kW onboard charger only draws 11 kW: 3 h 38 min for the same 36 kWh. On the 50 kW charger, going all the way to 100% with the simplified curve takes 1 h 31 min, of which 45 min are spent on the last 20%.

Tick "Compare with a petrol car" with 36 mpg and 3.50 per US gallon: the same 130 miles need 3.6 gallons, which costs 12.60, so the electric charge saves 2.60.

Frequently asked questions

Why stop at 80% on a rapid charger?

As the battery fills up, the car cuts the power to protect the cells. The last 20% often takes as long as the 60% before it. The calculator reproduces this with a simple, clearly stated model: above 80%, power is divided by 3. Real charging curves vary with the car and the temperature.

What is the difference between AC and DC charging?

On AC (a socket or a wallbox), the car's onboard charger converts the current, and its rating caps the charging speed, often at 7.4 or 11 kW. On DC, conversion happens inside the charger, which allows 50 kW and more, up to what the battery accepts.

Why does my 22 kW charger only deliver 11 kW?

Because the car's onboard charger is rated at 11 kW. The charger offers 22 kW, but the car only takes 11.

Why is the energy from the grid higher than the energy added?

Because of heat losses in the cable, the charger and the battery. At 90% efficiency, 40 kWh paid for at the meter puts 36 kWh into the battery. The calculator uses the energy from the grid to work out the cost.