SuperDevTools

Firewood calculator: cords, steres and wood for the winter

Convert an amount of firewood

Equivalents —
UnitEquivalent amount

Measure a woodpile

For a single row, the depth is the length of the pieces. Use the average height if the top is not flat. In the US, a stacked 4 × 4 × 8 ft pile is one cord whatever the piece length.

What the pile holds —
UnitEquivalent amount

How much firewood for a winter?

Typical values
Firewood needed —
How it is calculated
    Coefficients used (editable)

    Common, indicative values: they change with how carefully the wood is stacked, the shape of the pieces and the species. If your seller quotes their own coefficients, enter them here. The common European 33 cm coefficient is generous: combined with 0.7 solid m³ per stere, it describes a pile with almost no gaps.

    A cord is 128 ft³ stacked, or 3.62 m³, counted here as 3.62 steres; a face cord is one third of that.

    Rough figures. These coefficients and reference values are common estimates, not legal standards. When you buy, get the unit (cord, face cord, stere) and the piece length in writing.

    Everything is calculated in your browser; your last values stay on this device.

    Cords, steres and cubic meters in one place

    This firewood calculator answers three questions: how much is a delivery quoted in another unit, how much wood is in the pile by the shed, and how much firewood a winter takes. The common conversion factors it uses can be changed.

    How to use it

    1. In “Convert an amount of firewood”, enter the “Amount” and “Unit”: the table shows every equivalent.
    2. In “Measure a woodpile”, enter the three dimensions and the “Wood measured”.
    3. In “How much firewood for a winter?”, enter your heat demand in kWh or estimate it from the heated area, then choose the “Wood species”, the “Moisture content” and the “Appliance efficiency”. A price per cord is optional.
    4. “Coefficients used (editable)” lets you enter your seller's own figures.

    What a cord is, and why it is not solid wood

    A full cord is a stack 4 ft high, 4 ft deep and 8 ft long: 128 cubic feet, or 3.62 m³. That volume includes the air between the pieces. A face cord (also sold as a rick) is one row of 16 inch pieces, 4 ft high and 8 ft long, so about one third of a cord, but sellers do not all use the same piece length: always ask. A loose pickup load is not a cord.

    In Europe wood is sold by the stere, 1 m³ of 1 m logs stacked. One cord is about 3.62 steres. A stere holds roughly 0.6 to 0.7 m³ of solid wood; the tool uses 0.7. The European coefficients for shorter pieces (a stere cut to 33 cm fills about 0.7 m³) do not apply to US cords, which are measured stacked whatever the piece length.

    Worked examples

    • A pile 8 ft × 4 ft × 4 ft holds 128 ft³: exactly 1 cord, or 3.62 steres.
    • One cord holds about 3.62 × 0.7 = 2.54 m³ of solid wood and fills about 5.07 m³ when loose.
    • A heat demand of 10,000 kWh, seasoned oak (about 2,000 kWh per stere) and a 75% stove: each stere gives 1,500 kWh of useful heat, so 10,000 ÷ 1,500 = 6.67 steres, or 1.84 cords (5.52 face cords).
    • At $300 a cord, that winter costs about $551.79, and a kWh of useful heat about $0.055.

    Why seasoned wood matters

    A kilogram of seasoned wood under 20% moisture gives about 4 kWh (roughly 1.8 kWh per pound). Green wood first has to boil off its water: it burns cooler, smokes and dirties the flue. The tool takes off 15% for part-seasoned wood and 35% for green wood, as cautious rough figures. Species values are typical orders of magnitude.

    Estimating your heat demand

    If you do not know your yearly demand, “estimate it from the heated area” multiplies the area by a cautious reference: 5.6 kWh per ft² a year for a well insulated home, 10.2 for average insulation and 16.7 for an old, drafty house. A 1,500 ft² home with average insulation comes to 15,329 kWh. If wood is only a backup, count only the share of heat it provides.

    FAQ

    How many cubic feet are in a cord of wood?

    128 ft³ of stacked wood, 4 × 4 × 8 ft, including the gaps between pieces.

    How much is a face cord?

    One row 4 ft high and 8 ft long. With 16 inch pieces it is one third of a full cord, about 42.7 ft³.

    How many cords do I need for a winter?

    It depends on your demand and stove: 10,000 kWh of heat from seasoned oak in a 75% stove takes about 1.84 cords.

    Are these numbers legal standards?

    No. They are common estimates. Get the unit and piece length in writing when you buy.