SuperDevTools

MP3 cutter online

Nothing is uploaded: the file is read, cut and converted in your browser, on your device.

Or drop it here. MP3, WAV, OGG, M4A/AAC, FLAC or Opus: the page opens anything your browser can play.

An MP3 cutter that works offline in your browser

This MP3 cutter trims any audio file your browser can play: MP3, WAV, OGG, M4A/AAC, FLAC or Opus. Open the file, the waveform appears, set the start and end, listen, then download the part you kept. The file is never uploaded: decoding, cutting and writing the new file all happen on your device, which matters for a private voice message or a recorded meeting.

Typical jobs: a 30-second ringtone or alarm from a song, removing dead air at the start of a voice memo, shortening a track for a wedding slideshow or a school play, or cutting an ad break out of a recorded radio show. If you still need to record the sound, use the online voice recorder first.

How to cut an audio file

  1. Click “Choose an audio file” or drop the file onto the box. The info line shows the length, sample rate, mono or stereo, and file size.
  2. Drag the two handles on the waveform with the mouse or your finger. For precision, type times into “Start (min:s)” and “End (min:s)” as minutes:seconds.hundredths, for example 1:02.25. With the keyboard, an arrow key moves the focused handle by 0.1 s, Shift + arrow by 1 s, Page Up or Page Down by 10 s.
  3. Under “What to do with the selection?”, “Keep the selection” exports only the chosen part; “Remove the selection” deletes that passage and joins the beginning to the end.
  4. Set “Fade in (s)” and “Fade out (s)” if you want, then click “Play the result”. The space bar starts and stops playback.
  5. Change the “File name” if you like, pick the “Format”, and click “Download”.

Worked example: a 30-second ringtone

Take a 4:05 stereo MP3 at 44,100 Hz and keep the chorus from 1:02.25 to 1:32.25. The selection line announces a 0:30.00 file. In 16-bit stereo WAV each second takes 44,100 × 2 channels × 2 bytes = 176,400 bytes, so 30 seconds come to 5,292,000 bytes of audio plus a 44-byte header: about 5 MB. With a 0.5 s fade in and a 2 s fade out, the sound rises from silence and dies away smoothly, so the ringtone no longer starts with a click.

Another case: a 45:00 podcast with a sponsor read from 18:30.00 to 20:00.00. In “Remove the selection” mode, 1 min 30 s disappear and the file lasts 43:30.00. A 5-millisecond ramp on each side of the join stops a pop where the two parts meet, and the length stays exact.

Formats in and out

  • Input: the page opens whatever your browser can decode. MP3, WAV and AAC/M4A work almost everywhere; OGG, Opus and FLAC depend on the browser.
  • WAV output: “WAV 16-bit (lossless)” keeps the original sample rate (a 44,100 Hz MP3 stays at 44,100 Hz) and opens in every player and audio editor. It is larger than an MP3, about 10 MB per minute in stereo.
  • Compressed output: when your browser allows it, “Opus in WebM (compressed)” or “Opus in OGG (compressed)” gives a file roughly ten times smaller. It can only be encoded in real time: one minute of audio takes one minute, with the page open.
  • The page does not write MP3 files: convert the WAV afterwards if you need one.

Making a tutorial? You can also use the online screen recorder with sound. And if the part you kept is too quiet, run it through the tool to increase audio volume.

FAQ

Is my file uploaded to a server?

No. The file is read into your browser's memory and the result is built right there, with no network request. Nothing is kept once you close the page.

How precise is the cut?

The fields work to the hundredth of a second and the cut lands on the nearest sample, 1/44,100 of a second for a 44,100 Hz file. Cutting from 2.00 s to 5.50 s gives exactly 3.50 s, or 154,350 samples. Depending on the browser, a decoded MP3 may begin with a few hundredths of a second of encoder silence, so check by ear.

Can I cut a long file, say one hour?

Yes, as long as your device has the memory. The waveform peaks are computed in blocks, which stays fast even for an hour. One hour of decoded stereo takes about 1.3 GB of memory, so on an older phone stick to shorter files.

Why is my WAV bigger than the original MP3?

MP3 is compressed and WAV is not. Thirty seconds of 128 kbps MP3 weigh 480,000 bytes, against 5,292,044 bytes for 44,100 Hz stereo WAV. Choose an Opus format if size matters.